|
66 - 70L / 3996 - 4240 cu.in. (for a 22” frame) Top loading with side zipper. Load Transfer Rod Suspension System
Made in Thunder Bay, Ontario, Canada
Functional Design
This backpack is great for day excursions with a heavy load, or overnight hikes with compact gear. It is top loading with a wide enough opening to make packing easy. The chunky #10 YKK straight zipper down the side provides quick access to gear. The absence of bells and whistles in the bag design means there are fewer things to break down in the field. Removable options e.g. front pocket, allow you to customize the pack to your intended use.
ULTRA-Comfortable Suspension System
The Load Transfer Rod suspension system decreases the stress on the shoulders and back by increasing weight transfer to the hips. It should be considered by anyone with neck, back or shoulder concerns, and those carrying a heavy load.
Our suspension system, and the ability to fine tune the fit to your body shape, make our backpacks unique. Our shoulder straps and hip belt come in many sizes and are “gender neutral”. They are designed to wrap around any hip shape, and rest comfortably on shoulders of any size. This was supported by research and field testing with the Canadian Army, that indicated very little difference in the fitting issues between men and women. Comfort of an internal frame backpack was affected by the frame size and the ability to adjust the pack on the body using different sizes of hip belts and shoulder straps.
Volume:
(extended volume includes the snow cuff) Volume and Weight differs for each frame size. Determine your frame size by measuring your back length and adding 7”. (see “Measurement Instructions” on vertical navigation bar)
20” frame (x-short) 63 - 67L / 3813 - 4057 cu.in.
22” frame (small) 66 - 70L / 3996 - 4240 cu.in.
24” frame (med.) 69 - 73L / 4179 - 4423 cu.in.
26” frame (large) 76 - 80L / 4362 - 4606 cu.in.
28” frame (x-tall) 79 - 83L / 4545 - 4789 cu.in.
Weight:
20” frame (x-short) 2.92 kg / 6 lbs 6oz.
22” frame (small) 3.0 kg / 6 lbs 9oz.
24” frame (med.) 3.08 kg / 6 lbs 12oz.
26” frame (large) 3.17 kg / 6 lbs 15oz.
28” frame (x-tall) 3.25 kg / 7 lbs 2oz.
Features
Top loading, with a snow cuff/spindrift collar (drawstring top)
Detached floating lid
Lid pocket can be removed and becomes a very functional fanny pack for side trips
Daisy chains on the front allow the attachment of extra gear or removable options (e.g. Hiker Day Pack Front Pocket)
2 reinforced handles – at top back, and bottom front
Use the 4 side compression straps and the bottom pocket to cinch a walking stick, or ice axes down the side.
Suspension System - Load Transfer Rod Internal Frame
Frame (5 sizes): Rigid plastic framesheet with 2 aluminum stays – narrowing at the bottom for better hip mobility. A curved horizontal bar connects the 2 stays at the top to create headroom and to stabilize the load. Vertical stays can be removed and bent to the shape of your back.
Load Transfer Rod: This ¼” rod extends from the bottom hip belt stabilizer strap up the side seam of the pack. As the hip belt stabilizer is tightened, the stress travels up the fibreglass rod, causing a lifting of the load off the shoulders and transferring of weight onto the hips.
Back Panel: Thermo-moulded back pad with ¾” deep ventilation channels. Lumbar Pad is thermo-moulded and pulls forward to expose the aluminum stays.
Shoulder Straps (5 sizes): S-shaped with an adjustable chest strap; they are ¾” thick, two layers, with a dense EVA foam top layer that prevents the packs from digging into your shoulders. A strap behind the neck helps fine tune the fit on slim shoulders and many women.
Hip Belt (4 sizes): Thermo-moulded hip belt wraps around the body without wrinkles or pressure points. 2 stabilizer straps shape it to your pelvis, providing a custom fit (REGARDLESS OF GENDER).
Ostrom Internal Frame Backpacks come in 5 different frame sizes determined by the length of your back. A frame that is too short will not transfer the load to your hips, resulting in a tired back. A frame that is too long will feel unbalanced. Our interchangeable shoulder straps and hip belt come in many sizes to ensure you get a pack that fits you perfectly.
We are one of the few backpack manufacturers that enable you to remove the aluminum stays and bend them to the shape of your back. Other packs have factory bent stays. Our research shows that people’s backs are unique, and aluminum stays need to be custom shaped for maximum comfort.
Materials and Construction
Thermo-moulded back pad, lumbar pad and hip belt
Load Transfer Rod is made of fibreglass
EVA foam (high quality dense foam does not compress over time) and ether foam (soft and cushy) in shoulder straps
500Denier Cordura
Ballistics Cloth double bottom - tough as nails (inner layer is 500 D Cordura)
#10 YKK zippers (the best on the market)
National Moulding buckles (toughest on the market)
Each seam is sewn three times for maximum toughness
All seams and raw edges are bound so the fabric won’t fray over time
Comments
Please give us your back, chest, waist and hip measurements to ensure a properly sized backpack.
|
